United Kingdom HVAC Market Size and Share
United Kingdom HVAC Market Analysis by Mordor Intelligence
The United Kingdom HVAC market size reached USD 2.67 billion in 2025 and is forecast to expand to USD 3.27 billion by 2030, advancing at a 4.14% CAGR. This moderate growth reflects the rapid shift away from fossil-fuel heating toward low-carbon technologies, spurred by heat-pump boiler mandates that start in 2026 and by the legally binding net-zero target for 2050 [1]UK Parliament, “Net Zero and the UK Building Stock,” publications.parliament.uk. Retrofit activity dominates because most homes that will be standing in 2050 were already built, yet new-build standards such as the Future Homes Standard are lifting demand for integrated, all-electric systems. Momentum is strongest in smaller-capacity equipment as households adopt air-source heat pumps, while commercial growth is tied to data-center cooling and office refurbishments. Installers face acute skills shortages, and supply-chain tightness for copper and rare-earth magnets is keeping equipment prices elevated.
Key Report Takeaways
- By component, services captured 32.9% revenue in 2024 and are growing at 7.8% CAGR, while equipment retained 67.1% of United Kingdom HVAC market share in 2024.
- By end-user, the residential segment held 75.5% of the United Kingdom HVAC market size in 2024; the commercial segment is projected to expand at 7.5% CAGR through 2030.
- By installation type, retrofit applications accounted for 61.2% share of the United Kingdom HVAC market size in 2024, whereas new construction is rising at 5.4% CAGR to 2030.
- By capacity, systems rated 5-20 kW led with 32.1% United Kingdom HVAC market share in 2024; sub-5 kW units post the fastest 8.3% CAGR through 2030.
- Daikin, Johnson Controls and Carrier jointly commanded just under 30% of 2024 revenue, indicating moderate concentration.
United Kingdom HVAC Market Trends and Insights
Drivers Impact Analysis
| Driver | (~) % Impact on CAGR Forecast | Geographic Relevance | Impact Timeline |
|---|---|---|---|
| Supportive government energy-efficiency incentives | +1.2% | National, with concentrated impact in England and Wales | Medium term (2-4 years) |
| Rising demand for energy-efficient devices | +0.8% | National, with higher adoption in urban centers | Long term (≥ 4 years) |
| Construction boom and retrofit wave | +1.0% | National, with emphasis on London and Southeast England | Short term (≤ 2 years) |
| UK heat-pump boiler replacement mandates from 2026 | +1.5% | National, with accelerated implementation in new developments | Medium term (2-4 years) |
| Data-center cooling load spike from hyperscale build-outs | +0.6% | Regional, concentrated in London, Manchester, and Edinburgh | Short term (≤ 2 years) |
| Source: Mordor Intelligence | |||
Supportive Government Energy-Efficiency Incentives
The Boiler Upgrade Scheme has offered GBP 7,500 grants for both air-source and ground-source heat pumps since 2022, and the 2024 extension of the scheme confirmed long-term policy support. Complementary funding under the Social Housing Decarbonisation Fund and the Energy Company Obligation is unlocking finance across rental and low-income segments. Despite generous grants, uptake has lagged because installers are scarce and electricity remains pricier than gas in retail tariffs, limiting cost-parity for homeowners. Policymakers are exploring tax rebalancing to narrow the electricity-to-gas price gap, which would materially raise the return on investment for heat-pump retrofits.
Rising Demand for Energy-Efficient Devices
Public concern over climate change is high, yet awareness of heat-pump performance remains limited: a 2024 survey showed 70% of respondents knew little about the technology. Commercial buildings are moving quicker, adopting AI-enabled automation such as Johnson Controls’ Metasys 14.0, which has demonstrated 20% average energy savings in pilot sites. Variable-refrigerant-flow systems allow zone-level temperature management, and predictive maintenance driven by IoT sensors increases uptime while lowering service costs. These features are reshaping purchasing criteria toward lifecycle efficiency instead of upfront capital cost.
Construction Boom and Retrofit Wave
Nearly 80% of the 2050 residential stock already existed by 2025; therefore, retrofitting carries enormous weight. Government targets call for upgrading 20% of existing buildings to zero-carbon-ready status by 2030 [2]International Energy Agency, “Buildings Sector Pathway,” iea.org. London leads in retrofit volume, yet new-build momentum is strong in data centers, logistics hubs and mixed-use developments that specify low-carbon HVAC from the outset. Fragmented supply chains of thousands of SMEs complicate quality assurance, but innovative salary-sacrifice finance models and employer-backed loans are beginning to close funding gaps for homeowners.
UK Heat-Pump Boiler Replacement Mandates from 2026
Legislation requiring all new boilers to be hydrogen-ready within eighteen months is driving a strategic pivot across manufacturing and installation channels. Manufacturers are investing in hybrid systems that combine a small gas burner with a heat pump to hedge the uncertain direction of hydrogen infrastructure roll-out. The policy accelerates collaboration: British Gas announced a nationwide service partnership with NIBE in March 2025 to boost installer capacity ahead of the mandate.
Restraints Impact Analysis
| Restraint | (~) % Impact on CAGR Forecast | Geographic Relevance | Impact Timeline |
|---|---|---|---|
| High upfront cost of efficient systems | -1.8% | National, with higher impact in rural and lower-income areas | Medium term (2-4 years) |
| Skilled-labour shortage for installation and maintenance | -1.1% | National, with acute shortages in Scotland and Northern England | Long term (≥ 4 years) |
| Grid decarbonisation pace limiting electric HVAC ROI | -0.7% | National, with regional variations in renewable energy access | Long term (≥ 4 years) |
| Source: Mordor Intelligence | |||
High Upfront Cost of Efficient Systems
Heat-pump installations in 2024 typically ranged between GBP 10,000 and 15,000, against GBP 3,000-4,000 for a gas boiler replacement. Required envelope upgrades and electrical works can double project budgets, stretching payback periods even with grants. Electricity prices per kWh remained roughly three times higher than gas, suppressing operating-cost savings [3]Heat Pump Association, “Unlocking Widescale Heat Pump Deployment,” heatpumps.org.uk. Material price volatility, particularly for copper, has added further uncertainty for installers and end-users. Although zero-interest loans and employer schemes are emerging, awareness and administrative hurdles limit uptake.
Skilled-Labour Shortage for Installation and Maintenance
Only about 3,000 engineers were certified to fit heat pumps in 2024, well short of the 120,000-230,000 workers needed by 2030. Shortages inflate labour costs and delay projects, undermining consumer trust. Training programs such as the Enhanced Retrofit Fabric Improvement Training launched in Wales during 2024 are widening the talent pipeline, but scale remains insufficient. Industry is also lobbying for streamlined visas to attract qualified overseas technicians.
Segment Analysis
By Component: Services Accelerate Amid Equipment Complexity
Services accounted for 32.9% of 2024 revenue, a share projected to rise as system sophistication increases. The United Kingdom HVAC market size for services is expected to reach USD 1.25 billion by 2030, advancing faster than equipment. This surge is linked to sensor-rich installations that need commissioning, software updates and predictive maintenance. Equipment still holds the lion’s share because heat-pumps, VRF units and advanced chillers carry high capital expense. However, revenue is flattening as component prices face deflationary pressure once manufacturing scale improves.
Growth in services is fuelled by smart-control deployments: Daikin’s 2025 Smart Control System enables plug-and-play integration but still demands professional configuration to optimise hydronic loops. Facilities are increasingly governed by performance-based contracts where energy savings are guaranteed, deepening the role of service providers. As a result, labour scarcity becomes a revenue bottleneck as much as an operational constraint, putting wage inflation pressure on the United Kingdom HVAC market.
By End-User Industry: Commercial Growth Outpaces Residential Dominance
Residential applications commanded 75.5% of 2024 revenue. Yet the commercial segment is forecast to grow at 7.5% CAGR, outstripping overall United Kingdom HVAC market growth. Data-center cooling is the prime driver: hyperscale campuses around London, Manchester and Edinburgh demand redundant, high-efficiency chillers that must run on low-GWP refrigerants. Hospitals and schools are also ramping investment to comply with stricter indoor-air-quality norms introduced after the pandemic.
The United Kingdom HVAC market size for data centers alone is set to double by 2030, aided by AI workloads that raise heat densities. Pharmaceutical manufacturing is adopting adiabatic humidification and close-control air handling, opening white-space for niche OEMs. In contrast, residential retrofits hinge on grant mechanisms and smart-meter roll-outs that can monetise demand-response services.
By Installation Type: New Construction Momentum Builds Despite Retrofit Leadership
Retrofit installations held 61.2% of 2024 revenues, a natural outcome of the large existing housing stock. However, new construction is gaining share as builders pre-install low-carbon systems to comply with upcoming standards. Many developers now specify networked ground-source heat pumps linked to ambient-temperature loop grids in new estates, an approach that cuts upfront cost per dwelling by exploiting shared boreholes.
Within retrofit, whole-house approaches that bundle insulation, windows and mechanical ventilation are growing. Yet fragmented contractor ecosystems slow scaling; a typical heat-pump job can involve four separate trades. Government pilot schemes that coordinate design, finance and installation under a single contract are beginning to show time-and-cost efficiencies, signalling a potential acceleration by the late-2020s.
By Capacity Range: Distributed Systems Drive Small-Scale Growth
Systems rated 5-20 kW captured the largest 32.1% share of the United Kingdom HVAC market size in 2024, matching the heat requirements of typical semidetached homes. Sub-5 kW units, often monobloc heat pumps suited for apartments, are expanding at 8.3% CAGR. These compact systems benefit from simplified permitting and do not always require major panel upgrades, making them attractive to urban renters and landlords.
Smaller capacities also fit emerging demand-response programs: units equipped with smart inverters can modulate output to track grid frequency, earning revenue for building owners. Research has highlighted, however, that synchronized thermostat controls risk creating morning-peak surges, so utilities are piloting dynamic tariffs to stagger start-up cycles. At the opposite end, >200 kW plant room installations remain niche, with stable growth in hospitals and industrial sites.
Geography Analysis
England dominated installations in 2024, driven by high retrofit volumes in Southeast commuter belts and intense data-center construction around the M25 corridor. Scotland followed, leveraging abundant wind power that improves the carbon intensity of electric heating and thus the lifetime abatement value of heat pumps. The Scottish government’s more aggressive 2038 interim emissions target means grants and planning approvals arrive faster, attracting manufacturers to pilot hybrid heat-pump-hydrogen solutions.
Wales exhibited rising activity after regional training centers opened in Swansea and Wrexham, narrowing the installer gap. Rural Mid-Wales and the Scottish Highlands still face higher transport costs for equipment and insufficient three-phase grid capacity, limiting uptake despite favourable climates. Northern Ireland lags owing to divergent building regulations and a smaller grant budget, yet cross-border interconnection projects promise better electricity prices that could unlock demand by 2028.
Regional electricity tariffs, grid-carbon factors, and policy incentives together shape investment decisions. A homeowner in Cornwall may face higher peak tariffs but can join community solar-plus-battery schemes, while an office in Glasgow benefits from lower-carbon grid electricity that enhances corporate ESG metrics. Local authorities adopting area-wide heat-decarbonisation plans are steering bulk procurement, which is expected to compress margins but speed diffusion of standardised heat-pump kits.
Competitive Landscape
The United Kingdom HVAC market is moderately concentrated. Daikin, Johnson Controls, and Carrier together held just below one-third of 2024 revenue. These multinationals extended service footprints via acquisitions: Daikin bought Robert Heath Heating, adding 450 technicians to its UK base [4]Daikin Europe, “Smart Control System Press Release,” daikin.eu. Trane Technologies moved into transport refrigeration by purchasing Marshall Fleet Solutions in March 2025.
Product differentiation is shifting toward software. Johnson Controls markets AI-driven chillers that self-optimise for carbon intensity, winning energy-as-a-service contracts with commercial landlords. Domestic boiler brands such as Worcester Bosch and Baxi are racing to certify hydrogen-ready models while launching compact monobloc heat pumps to defend share. Meanwhile, startups like Homely Energy offer cloud-based controls that integrate time-of-use tariffs with EV charging, a value proposition that traditional OEMs are acquiring rather than building in-house.
Supply-chain alliances reach back to material sourcing: copper-tube producer Mueller Industries signed multi-year contracts with heat-pump OEMs to stabilise pricing, illustrating how raw-material volatility is pushing vertical collaboration. Japanese and Korean firms are investing in UK test labs to certify R32 and R290 refrigerant systems that meet 2030 F-gas quotas, positioning for future bans on high-GWP blends.
United Kingdom HVAC Industry Leaders
-
Daikin Industries Ltd.
-
Carrier Global Corporation
-
Johnson Controls International plc
-
Mitsubishi Electric Corporation
-
Trane Technologies plc
- *Disclaimer: Major Players sorted in no particular order
Recent Industry Developments
- March 2025: British Gas formed a strategic partnership with NIBE to widen national heat-pump after-sales coverage.
- March 2025: Trane Technologies acquired Marshall Fleet Solutions to expand UK cold-chain services.
- February 2025: Modine announced a new factory in Chennai to supply Airedale-brand data-center cooling solutions.
- January 2025: Daikin Europe launched a plug-and-play Smart Control System for hydronic plants.
Research Methodology Framework and Report Scope
Market Definitions and Key Coverage
Our study defines the United Kingdom heating, ventilation, and air-conditioning market as all factory-built equipment plus related installation, maintenance, and retrofit services that deliver regulated indoor temperature, humidity, and air purity in residential, commercial, and industrial buildings. Revenue is counted at the first domestic sale in constant 2024 US dollars.
Scope exclusion: we exclude portable plug-in room coolers, vehicle climate-control systems, and aftermarket spare parts.
Segmentation Overview
- By Type of Component
- HVAC Equipment
- Heating Equipment
- Heat Pumps
- Boilers, Radiators, etc
- Air-Conditioning and Ventilation Equipment
- Split Systems (Ducted and Ductless)
- VRF
- Air Handling Units
- Chillers
- Fans Coils
- Indoor Packaged and Roof Tops
- Others Types
- Heating Equipment
- HVAC Services
- Installation
- Maintenance and Repair
- Retrofit and Energy Management
- HVAC Equipment
- By End-user Industry
- Residential
- Commercial
- Office Buildings
- Retail and Hospitality
- Healthcare Facilities
- Educational Institutions
- Data Centers
- Public and Government Buildings
- Industrial
- Manufacturing Plants
- Oil and Gas and Energy
- Food and Beverage Processing
- Pharmaceuticals
- By Installation Type
- New Construction
- Retrofit / Replacement
- By Capacity Range (Cooling/Heating kW)
- Up to 5 kW
- 5 - 20 kW
- 20 - 50 kW
- 50 -200 kW
- Above 200 kW
Detailed Research Methodology and Data Validation
Primary Research
Mordor analysts spoke with distributors, facilities managers, mechanical contractors, and municipal inspectors across England, Scotland, and Wales, and we ran structured household surveys to validate channel margins, service rates, and retrofit intent.
Desk Research
We began with publicly available building-stock and energy-efficiency statistics released by the Office for National Statistics, the Department for Energy Security and Net Zero, Eurostat construction permits, and the UK Heat Pump Association, thereby anchoring installed base and replacement cycles. Trade flows from HMRC customs dashboards and UN COMTRADE hint at import-heavy product categories, while monthly producer-price indices frame selling-price trends. Company filings, planning-application portals, and paid feeds from D&B Hoovers and Dow Jones Factiva give us competitive and project-level color. This list is illustrative, and many additional sources supported data checks and clarification.
We then review peer-reviewed journals and conference proceedings to gauge technology diffusion, and we cross-reference patent counts through Questel so we can flag emerging designs such as low-GWP refrigerant heat pumps.
Market-Sizing & Forecasting
We adopt a top-down and bottom-up blend: national dwelling counts, commercial floor area, and typical HVAC lifespans build an initial demand pool, which is then adjusted with import-export balances and self-manufacture shares. Targeted bottom-up checks using installer panel feedback, sampled project bills of quantities, and median ASP times volume for heat-pump kits tighten our ranges. Variables such as Boiler Upgrade Scheme uptake, EPC band migration, labor availability, and heating degree-days feed the model. Forecasts draw on multivariate regression alongside ARIMA smoothing, and where installer data are sparse, we apply regional multipliers derived from recent planning consents.
Data Validation & Update Cycle
Our outputs pass variance scans against ONS capital-expenditure data and national energy-use statistics, followed by multi-analyst review before sign-off. We refresh every year, with interim updates triggered when subsidies, standards, or macro shocks materially shift the baseline, ensuring clients receive the latest view at delivery.
Why Mordor's United Kingdom HVAC Baseline Commands Reliability
Published estimates often diverge because firms choose dissimilar scopes, pricing points, and refresh schedules.
We keep our scope consistent and include services, therefore providing a fuller tally that decision-makers can trust.
Benchmark comparison
| Market Size | Anonymized source | Primary gap driver |
|---|---|---|
| USD 2.67 B (2025) | Mordor Intelligence | |
| USD 0.48 B (2024) | Regional Consultancy A | Ventilation-only scope and manufacturer gate pricing |
| USD 6.20 B (2024) | Global Consultancy B | Adds building automation and aftermarket parts, uses rolling five-year ASP |
The comparison shows that once inclusions, price points, and refresh cadence are standardized, Mordor's balanced estimate sits between extremes and remains traceable to transparent variables.
Key Questions Answered in the Report
What is the current size of the United Kingdom HVAC market?
It was valued at USD 2.67 billion in 2025 and is forecast to reach USD 3.27 billion by 2030.
How fast is the United Kingdom HVAC market expected to grow?
The market is projected to expand at a 4.14% CAGR from 2025 to 2030.
Which segment is growing the quickest?
Services are the fastest, advancing at 7.8% CAGR as complex heat-pump systems require specialist commissioning and maintenance.
Why are heat pumps central to market growth?
Government mandates from 2026 and grants of GBP 7,500 per unit are driving uptake, positioning heat pumps as the main pathway to residential decarbonisation.
What is the biggest challenge facing the industry?
A shortage of qualified installers, with only about 3,000 heat-pump engineers trained versus a need for up to 230,000 by 2030, is constraining project delivery.
How concentrated is supplier power in this market?
The top five firms held close to 60% of 2024 revenue, indicating moderate concentration and healthy competition for emerging niches.
Page last updated on: