The worlds oil supply in 2013 was 90.2 mb/d which was more than in 2012. The total growth from the earlier year was 0.7mb/d. This region supplied more than 50% of oil to the world. This year on year increase of oil sector demand and supply requires lot of regulation and control. The process requires a lot of advanced devices to maintain the constant or increased supply. This is where artificial systems help the region to continuously produce at the same rate or increase the rate of production.
Artificial lift is a process used on oil wells to increase pressure within the reservoir and encourage oil to the surface. When the natural drive energy of the reservoir is not strong enough to push the oil to the surface, artificial lift is employed to recover more production.
While some wells contain enough pressure for oil to rise to the surface without stimulation, most don't, requiring artificial lift. In fact, 96% of the oil wells in the US require artificial lift from the very beginning.
Even those wells that initially posses natural flow to the surface, that pressure depletes over time, and artificial lift is then required. Therefore, artificial lift is generally performed on all wells at some time during their production life.
Although there are several methods to achieve artificial lift, the two main categories of artificial lift include pumping systems and gas lifts.
The most common type of artificial lift pump system applied is beam pumping, which engages equipment on and below the surface to increase pressure and push oil to the surface. Consisting of a sucker rod string and a sucker rod pump, beam pumps are the familiar jack pumps seen on onshore oil wells.
Another artificial lift pumping system, hydraulic pumping equipment applies a downhole hydraulic pump, rather than sucker rods, which lift oil to the surface. Here, the production is forced against the pistons, causing pressure and the pistons to lift the fluids to the surface. Similar to the physics applied in waterwheels powering old-fashion gristmills, the natural energy within the well is put to work to raise the production to the surface.
Electric submersible pump systems employ a centrifugal pump below the level of the reservoir fluids. Connected to a long electric motor, the pump is composed of several impellers, or blades, that move the fluids within the well. The whole system is installed at the bottom of the tubing string. An electric cable runs the length of the well, connecting the pump to a surface source of electricity.
What the Report Offers
1· Market Definition for the specified topic along with identification of key drivers and restraints for the market.
2· Market analysis for the global artificial lift systems Market, with region specific assessments and competition analysis on a global and regional scale.
3· Identification of factors instrumental in changing the market scenarios, rising prospective opportunities and identification of key companies which can influence the market on a global and regional scale.
4· Extensively researched competitive landscape section with profiles of major companies along with their share of markets.
5· Identification and analysis of the Macro and Micro factors that affect the global artificial lift systems market on both global and regional scale.
6· A comprehensive list of key market players along with the analysis of their current strategic interests and key financial information.
1.1 Report Guidance
1.2 Markets Covered
1.3 Key Points Noted
2. Executive Summary
3. Market Overview
3.2 Market Definition
3.3 Premium Insights
3.4 Artificial Lift System Components
4. Drivers, Constraints and Opportunities
4.1.1 Increasing Drilling Activity
4.1.2 Need to Enhance Production Levels
4.1.3 New Exploration Activities
4.2.1 Equipment Costs
4.2.2 Lack of Skilled Labour
4.3.1 Increasing Subsea Drilling
5. Middle East Artificial Lift Systems Market Analysis, by Installations
5.1 Electric Submersible Pump System
5.2 Progressive Cavity Pump System Component Market
5.3 Rod Lift Component Market
6. Middle East Artificial Lift Systems Market Analysis, by Country
6.2 Major Countries
6.2.1 Saudi Arabia
126.96.36.199 Market Demand to 2020
188.8.131.52 Recent Trends and Opportunities
184.108.40.206 Market Demand to 2020
220.127.116.11 Recent Trends and Opportunities
18.104.22.168 Market Demand to 2020
22.214.171.124 Recent Trends and Opportunities
7.2 Market Share of Key Companies, by Geography
7.3 Market Share of Key Companies, by Equipment
8. Company Profiles
8.1 Baker Hughes Inc.
8.2 Halliburton Company
8.3 Schlumberger Limited
8.4 Weatherford International Ltd
8.5 General Electric Energy
8.6 Borets Company Llc
8.7 National Oilwell Varco Inc.
8.8 Torqueflow Sydex Ltd
8.9 Compass Energy
8.10 Gulf Coast Pump & Supply
9. Competitive Landscape
9.1 Deal Summary
9.1.2 Private Equity
9.1.3 Equity Offerings
9.1.4 Debt Offerings
9.1.6 Asset Transactions
9.2 Recent Developments
9.2.1 New Technology Inventions
9.2.2 New Contract Announcements
10.3 Market Definition
10.3.3 Secondary Research
10.3.4 Primary Research
10.3.5 Expert Panel Validation
10.4 Contact Us